Plywood Edge System
Here is a simple and economical way to make hardwood edge banding for plywood panels and shelves up to 3/4" thick. Set the height of the female groover (A) in your router table so that the point is centered on the plywood panel and make a cut. Now, using the male groover (B) in your router table, set the height of the bit to match the first cut and mill hardwood stock to create the back of your edge molding. Glue the two pieces together and flush trim the edges if necessary.

All bits are two flute, carbide tipped, with a 1/2" shank, and are 2-7/8" overall, with the bearing guides. $79.99 for the pair from Eagle America.

For more information visit them online
[http://www.eagle-america.com]

400psi Nailer
MAX USA Corp. developed the world's first high-pressure pneumatic nailing system. For the past decade, it has "revolutionized the construction industry in Japan". Powered by 400 psi technology, the MAX tools are approximately 40% lighter and 20% smaller than most competitors' tools, without sacrificing power.

Now, the MAX system is available in the North American market. The HN90 weighs only 5.2lbs. can hold 300 nails in a standard 15 degree wire coil and shoot nails from 2" x .099" to 3" x .148". It features their Anti-Double Fire mechanism (US Patented 5597106), dial adjustable depth control, unique tangle free swivel fitting and maintenance free end cap filter (US Patent 5637125).

To learn more about the Nailers you can call MAX at or visit us on the web at www.maxusacorp.com.

For more information call 800-223-4293 or visit them online [www.maxusacorp.com]

3X Sandpaper now in Belts, Discs and Spindle Sleeves
Norton's 3X Premium Sandpaper Sheets have been so successful that they are bringing that technology to high performance belts, discs and spindle sleeves. The premium belts provide ultimate performance and a superior finish. The self-sharpening zirconia alumina abrasive is resin bonded to a heavy cloth backing for durability, rapid stock removal and resistance to clogging. These belts can be run in both directions for increased sanding life. They are available in a variety of sizes and grits ranging from extra coarse to very fine. Norton 3X discs are manufactured with a blend of ceramic alumina and heat-treated aluminum oxide grain that cuts fast yet remains cool. They last longer due to the unique resin bonding system that secures the abrasive to the fiber reinforced backing and an anti-clog coating is applied. The 5" discs can be used on any random orbit sander, due to the patented universal vacuum hole pattern. They are available in grits ranging from extra coarse to extra fine. The spindle sleeves fit all manufacturer's 4-1/2" spindle sanders. Zirconia alumina is bonded to a heavy paper backing for maximum strength and durability.

For more information visit them online
[www.nortonabrasives.com]

Ed note: this link wasn't working the day we went to press. You may need to do a search.

For more information, visit them online.
[ www.microplane.com].

Automatic Stop
If you're going to be making lots of the same item, TigerStop may be just what you need. It's a linear positioning device that attaches to existing equipment (like a miter saw fence) to automate the positioning of material for processing. This replaces your manual stop for accurate cuts the first time, every time. Repeatable accuracy of +/- 0.004" makes any project or job quick and easy. TigerStop is simple to learn and use! Please visit www.tigerstop.com to find out more.

For more information visit them online [http://www.tigerstop.com]

Deck Builders' Bonus
Makita has expanded its already comprehensive impact tool lineup with a new impact driver, model 6952. It has the highest torque in its class (1,062 in.lbs.) and the most efficient impacts per minute (0 ö 3,100 IPM), while being extremely lightweight (2.9 lbs.) and compact. At only 9" long, it offers access and power to fasten in locations where it was previously impossible.With an all-metal hammer casing and heavy-duty hammer and anvil, it is built to withstand the toughest of jobsite environments. The 6952 also features true variable speed (0-3,200 RPM) for controlled fastening. An ergonomically designed rubberized grip provides more comfort, control and reduced fatigue to the operator. It also features an easily accessible forward/reverse switch, allowing single-handed operation, and a tool hook that attaches to both sides of the driver for convenience and versatility.

For more info, visit them online.
[www.makitatools.com]